Included are:
-> Manual – booklet
-> Safety booklet
-> Pointer rod – steel
-> Alignment rod – steel
-> Angle scale – aluminum or steel plate with glued on paper scale (protected by plastic foil), #10-32 threaded adapter on back of scale
->
Spare scale (not shown in photo) – paper
->
Scale fixture, i.e., scale mounting fixture – ¾” steel or aluminum flat with keyway, #10-32 thumb bolt, and steel rod
->
Fixture, i.e., fixture for pointer rod – aluminum square bar
This tool is for private and non-commercial applications |
Prerequisites: whatever lathe model you have you will need
-> a fast tool change system or similar mounting fixture that allows to rotate the tool post (compount slide)
-> and enough space along the lathe bed (distance between centers of at least 10”)
|
Compatibility? The system is explicitely tested on
-> a 4100 HiTorque Mini Lathe
->
which appears to be compatible to a SIEG SC2 lathe as well as on a
->
Craftsman 109.0703 lathe which is apparently identically with a
->
Dunlap 109.0703 lathe (the .0703 model is the so-called long bed model)
but should work on most China import type lathes.
|